Sony CDX-GT828U Benutzerhandbuch
5
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Pressing the RESET button will erase the clock setting
and some stored contents.
Preparing the card remote
commander
commander
Before using the card remote commander for the
first time, remove the insulation film.
first time, remove the insulation film.
Tip
For how to replace the battery, see “Replacing the
lithium battery of the card remote commander” on
page 22.
For how to replace the battery, see “Replacing the
lithium battery of the card remote commander” on
page 22.
Setting the clock
The clock uses a 24-hour digital indication.
1
Press and hold the select button.
The setup display appears.
The setup display appears.
2
Rotate the control dial until “Clock
Adjust” appears.
Adjust” appears.
3
Press the select button.
4
Rotate the control dial to set the hour
and minute.
To move the digital indication, press (SEEK)
–/+.
and minute.
To move the digital indication, press (SEEK)
–/+.
5
After setting the minute, press the
select button.
The setup is complete and the clock starts.
select button.
The setup is complete and the clock starts.
RESET
button
button