Sony CDX-M800
14
Receiving the stored stations
1
Press (SOURCE) repeatedly to select
the radio.
the radio.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press the number button ((1) to (6))
on which the desired station is stored.
on which the desired station is stored.
Tip
Press
Press
M or m to receive the stations in the order they
are stored in the memory (Preset Search function).
If preset tuning does not work
Press (SEEK) (
<) or (SEEK) (,) to
search for the station (automatic
tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
• If automatic tuning stops too frequently, turn on the
• If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals. See “Changing the sound and display
settings” on page 21.
signals. See “Changing the sound and display
settings” on page 21.
• If you know the frequency of the station you want to
listen to, press and hold
< or , to locate the
approximate frequency, then press
< or ,
repeatedly to fine adjust to the desired frequency
(manual tuning).
(manual tuning).
If FM stereo reception is poor
Select monaural reception mode
See “Changing the sound and display
settings” on page 21.
The sound improves, but becomes monaural
(“ST” disappears).
See “Changing the sound and display
settings” on page 21.
The sound improves, but becomes monaural
(“ST” disappears).
Tip
If FM broadcasts are difficult to hear, set DSO to off
(page 23).
If FM broadcasts are difficult to hear, set DSO to off
(page 23).
Storing only the desired
stations
stations
You can manually preset the desired stations on
any chosen number button.
any chosen number button.
1
Press (SOURCE) repeatedly to select
the radio.
the radio.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press (SEEK) (
<) or (SEEK) (,) to
tune in the station that you want to
store.
store.
4
Press the desired number button ((1)
to (6)) for 2 seconds until “MEM”
appears.
The number button indication appears in the
display.
to (6)) for 2 seconds until “MEM”
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
If you try to store another station on the same number
button, the previously stored station will be erased.