Sony dvo-1000md Benutzerhandbuch
Record
ing
Recording
27
For detailed information on how to turn the power
on or off, see “Turning the Power On/Off” on page
15.
on or off, see “Turning the Power On/Off” on page
15.
2
Press the OPEN/CLOSE button.
The disc tray opens.
The message changes to “OPEN” on the front panel
display.
The message changes to “OPEN” on the front panel
display.
3
Place the disc on the tray.
4
Press the OPEN/CLOSE button. Or push the disc
tray lightly.
tray lightly.
The disc tray closes.
The DISC IN display blinks and the message “Now
loading...” appears on the front panel display.
When the DISC IN display stops blinking, go to
step 5.
The DISC IN display blinks and the message “Now
loading...” appears on the front panel display.
When the DISC IN display stops blinking, go to
step 5.
5
Press the zREC button.
The unit starts recording of one title.
6
To stop recording that title, press the xSTOP
button.
button.
7
Repeat recording of the remaining titles by
repeating steps 5 and 6.
repeating steps 5 and 6.
The titles are numbered in the sequence they are
recorded.
recorded.
To pause during recording
Press the XPAUSE button.
To resume recording, press the XPAUSE button again.
Press the XPAUSE button.
To resume recording, press the XPAUSE button again.
Notes
• At the beginning of recording, an index is marked
automatically. Also, indexes are marked whenever
you press the XPAUSE button.
you press the XPAUSE button.
• When the unit is remotely controlled with the RS-
232C remote interface, the STOP command works as
the pause task or stop recording task. Which task is
effective depends on the setting of the 232C STOP
item (see page 49) of the ENHANCED MENU of the
SETUP MENU.
the pause task or stop recording task. Which task is
effective depends on the setting of the 232C STOP
item (see page 49) of the ENHANCED MENU of the
SETUP MENU.
If buttons on the front panel do not
function even if you push them
function even if you push them
The KEY INHIBIT item (see page 47) of the SETUP
MENU is set to “ON.”
Thus, the key-lock function is activated so that all
buttons except the MENU button, the LIST button, the
power switch, and the OPEN/CLOSE button are
deactivated to prevent you from pressing buttons
accidentally.
To re-activate the buttons, set the KEY INHIBIT item to
“OFF.”
However, when the unit is in menu operation status, you
can use the
MENU is set to “ON.”
Thus, the key-lock function is activated so that all
buttons except the MENU button, the LIST button, the
power switch, and the OPEN/CLOSE button are
deactivated to prevent you from pressing buttons
accidentally.
To re-activate the buttons, set the KEY INHIBIT item to
“OFF.”
However, when the unit is in menu operation status, you
can use the
B, b, V, v, and SET buttons.
Marking Indexes During Recording
You can mark indexes at desired points during
recording. This allows you to search for the desired
points instantly during playback, and also to play a
segment specified by two points in succession.
You can mark up to 254 indexes on one disc and up to 99
indexes within one title.
You can mark indexes using the following three
methods.
recording. This allows you to search for the desired
points instantly during playback, and also to play a
segment specified by two points in succession.
You can mark up to 254 indexes on one disc and up to 99
indexes within one title.
You can mark indexes using the following three
methods.
To use the XPAUSE button of the unit
Press the XPAUSE button on the front panel of the unit.
Press the XPAUSE button on the front panel of the unit.
With the recording/playback surface facing
down
down
Title 1
Title 2
Title 3
Recording
starts
starts
Recording
stops
Recording
starts
stops
Recording
starts
Recording
stops
Recording
starts
stops
Recording
starts
Recording
stops
stops