Sony DWA-01D Benutzerhandbuch

22

Attachment and connections

Insert the DWR-S01D or WRR-855 into the 
wireless receiver slot.

Insert the receiver/tuner unit into the 
wireless receiver slot after observing 
the direction of the D-sub 15-pin 
connector inside the slot and that of the 
receiver/tuner unit.

Fasten four mounting screws of the 
receiver/tuner unit with a screwdriver.

 

If any of the screws are loose, weatherproof 
structure may not be obtained or 
malfunction due to vibration may occur.

Use the DWA-01D to mount the wireless 
receiver on the rear of the Sony camcorder. 
In order to do so, an optional mount bracket 
(A-8278-057-B) and the mount plate 
supplied with the DWA-01D are required. 
To detach the DWA-01D from the mount 
plate, push the release lever on the mount 
plate.

Using the DC power cable supplied with the 
DWA-01D, connect the DC IN connector to 
the DC OUT connector of the camcorder.

For the camcorder that accepts 
analog audio only
Use the audio cables supplied with the 
DWA-01D to connect the OUTPUT1 and 2 

BP-GL95/GL65/L80S/
L60S battery pack 
(not supplied)

Mount bracket (A-8278-057-B)
(not supplied)

Mount plate 
(supplied)

Phillips screwdriver