Sony HSR-X200P Benutzerhandbuch

27

 (GB)

You can set the HSR-X200/X200P to perform
recording during a specified time every day or on a
specified day of the week.
Up to eight sets of timer recording can be specified.
On the days specified as holidays with HOLIDAY
SET, timer recording will be made with the same
conditions as those set for Sunday.

In timer recording, data will be recorded in the normal
recording area with the same picture quality as
selected for normal recording.

Be sure that the built-in clock has been correctly set.
Clock setting can be achieved with LANGUAGE/
CLOCK SET of MAIN MENU 1 

.

The day of the week and starting/ending times are to
be specified to activate timer recording.
Use TIMER SET of MAIN MENU 1.

                 <TIMER SET>

 WEEK  START  STOP    REC CYCLE         SET

 SUN   --:-- --:--   --     SEC(----H)  OFF

 MON   08:00 18:00   A 0.05 SEC(  14H)  ON

 THE   08:00 18:00   A 0.10 SEC(  27H)  ON

 WED   08:00 18:00     0.20 SEC(  54H)  ON

 THU   08:00 18:00   A 0.07 SEC(  18H)  ON

 FRI   08:00 18:00       30 SEC(9999H)  OFF

 SAT   --:-- --:--    --    SEC(----H)  OFF

 DLY   --:-- --:--    --    SEC(----H)  OFF

START: Set the time to start recording (hours and

minutes in sequence).

STOP: Set the time to stop recording (hours and

minutes in sequence).

REC CYCLE: Select the recording cycle.
SET: To activate timer recording specified on this

line, set to ON.

The same picture quality selected for normal recording
is used for timer recording.  When you select REC
CYCLE, the possible recording time is automatically
calculated and displayed in parentheses (max. 9999).
When audio recording is valid, “

A

” appears before the

REC CYCLE value.

Press the MENU button to display MAIN MENU 1
on the monitor screen.

Turn the Jog dial to highlight 6. TIMER SET and
turn the Shuttle dial clockwise.

The TIMER SET display appears.

Turn the Jog dial to highlight the line to be set and
turn the Shuttle dial clockwise to finalize your
selection.

The WEEK column of the selected line flashes.

Turn the Jog dial to set the day of the week and
turn the Shuttle dial clockwise to register the
setting.

To record with the same condition every day, set to
DLY.
The left field of the START column flashes.

Set the remaining items on the line using the Jog
and Shuttle dials.

Use the lowest two lines.
Set the day and time to start recording on the upper
line and those to stop recording on the lower line.

 SAT   19:00 --:--   -- --  SEC(----H)  ON

 MON   --:-- 06:00   A 0.05 SEC(  14H)  ON

If you next wish to set holidays, press the MENU
button to advance to the HOLIDAY SET display
(next page).
To end the settings, press the EXIT/OSD button.