Sony ipela nsr series Benutzerhandbuch
13
Chapter 1 Introduction
E Alarm output connector
Use this connector to connect the alarm output lines.
For connection details and a wiring diagram for alarm output, see the “I/O Port”
(page 170).
Use this connector to connect the alarm output lines.
For connection details and a wiring diagram for alarm output, see the “I/O Port”
(page 170).
F Audio input connector*
Use this connector to input audio from a peripheral audio device, such as a
microphone.
Use this connector to input audio from a peripheral audio device, such as a
microphone.
G USB connector
Use this connector to connect a USB keyboard, mouse, USB flash memory or
the RM-NS10 remote control unit to the NSR.
Use this connector to connect a USB keyboard, mouse, USB flash memory or
the RM-NS10 remote control unit to the NSR.
H LAN connectors
Use these connectors to connect 10 Base-T, 100 Base-TX, or 1000 Base-T
network cables to the NSR.
Use these connectors to connect 10 Base-T, 100 Base-TX, or 1000 Base-T
network cables to the NSR.
I Monitor connectors (1 and 2)
Use these connectors to connect a monitor.
Use these connectors to connect a monitor.
J Audio output connectors (L and R)
Use these connectors to output audio to a peripheral audio device.
Use these connectors to output audio to a peripheral audio device.
K Power supply connector
Use this connector to connect the power cord.
Use this connector to connect the power cord.
* This feature is not currently supported.