Sony ipela nsr series Benutzerhandbuch

141

Chapter 5  Settings

When the [Show All] check box is selected, all the VMF 
packages for the camera are displayed. When the check box 
is cleared, only the VMF packages for the targeted camera 
are displayed.

Uses a VMF package (Unattended), an initialization period 
of approximately 40 seconds is required at the start time of 
the schedule. Detection is not performed during 
initialization, so be careful when configuring the schedule.

VMD (Recorder)
Enable motion detection.

VMD (Recorder) Configuration
Select setting information for motion detection.

Except for the way the start/end date and time are specified, the 
configuration method is the same as that of a recurring schedule. 

Start Date
Specify the date and time you want the schedule to start.
The display format of the date and time is in accordance with the [Date/
Time Format] setting of “Main” in the “General” screen (page 84). 

End Date
Specify the date and time you want the schedule to end.
The display format of the date and time is in accordance with the [Date/
Time Format] setting of “Main” in the “General” screen (page 84). 

Once you have configured all the desired settings, click [Save] in the upper-
right corner of the window.

The settings are applied.
If you want to ignore all your setting modifications, click [Discard].

When you register recording schedules one after another, the configurations 
for a previously registered schedule are set as the default values for each 
new schedule you create.