Sony MEXBT3600U Benutzerhandbuch
17
Operating an audio device with this
unit
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
* Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
performed on the audio device.
Notes
• During audio device playback, information such as
• During audio device playback, information such as
track number/time, playback status, etc., of a
connected audio device is not displayed on this unit.
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Deleting registration of all
paired devices
paired devices
1
Press (OFF).
This unit is turned off.
This unit is turned off.
2
If “
” lights, press and hold
(BT) until “
” turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until “BT INIT” appears.
until “BT INIT” appears.
5
Press (SEEK) +.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while “INITIAL” is
flashing.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while “INITIAL” is
flashing.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
1
Press the select button repeatedly
until the desired item appears.
until the desired item appears.
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
*1 When EQ3 is activated.
*2 When AUX source is activated.
*3 When Bluetooth audio source is activated
*2 When AUX source is activated.
*3 When Bluetooth audio source is activated
To
Press
Play
(6) (PAUSE)* on this unit.
Pause
(6) (PAUSE)* on this unit.
Skip tracks
SEEK –/+ (
.
/
>
) [once for
each track]
EQ3
To select an equalizer type: “XPLOD,”
“VOCAL,” “EDGE,” “CRUISE,” “SPACE,”
“GRAVITY,” “CUSTOM” or “OFF” (
“VOCAL,” “EDGE,” “CRUISE,” “SPACE,”
“GRAVITY,” “CUSTOM” or “OFF” (
z
).
LOW*
1
, MID*
1
, HI*
1
To customize the equalizer curve.
BAL (Balance)
To adjust the balance between the right and left
speakers: “RIGHT-10” – “CENTER” (
speakers: “RIGHT-10” – “CENTER” (
z
) –
“LEFT-10”
FAD (Fader)
To adjust the balance between the front and rear
speakers: “FRONT-10” – “CENTER” (
speakers: “FRONT-10” – “CENTER” (
z
) –
“REAR-10”
SUB (Subwoofer volume)
To adjust the subwoofer volume: “+10 dB” –
“0 dB” (
“0 dB” (
z
) – “–10 dB”
(“ATT” is displayed at the lowest setting.)
AUX*
2
(AUX level)
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 19).
Adjustable level: “+18 dB” – “0 dB” (
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 19).
Adjustable level: “+18 dB” – “0 dB” (
z
) –
“–8 dB”
BTA*
3
To adjust the volume level for each connected
Bluetooth audio device. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: “+18 dB” – “0 dB” (
Bluetooth audio device. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: “+18 dB” – “0 dB” (
z
) –
“–8 dB”