Sony net md walkman mz-n10 Benutzerhandbuch

2

CAUTION

Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.

• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

• Keep the temperature of the soldering iron around 270 ˚C dur-

ing repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size)

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 ˚C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C .
Caution: The printed pattern (copper foil) may peel away if the

heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur
such as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

Use house current, nikel metal hydride rechargeable battery, 
LR6 (SG) battery, or car battery.

For use in your house: For the supplied battery charging 
stand, use the AC power adaptor supplied with this recorder. 
Do not use any other AC power adaptor since it may cause 
the recorder to malfunction

0

0

Optical cable (1)
CD-ROM (SonicStage Ver. 1.5) (1)*
Carrying pouch/carrying case with a belt clip (except USA model) (1)
Recordable MD (USA and Canada models only) (1)

∗Do not play a CD-ROM on an audio CD player.

Headphones/earphones with a remote control (1)

Approx. 78.5 

×  73.3 ×  13.8 mm (w/h/d) 

(3

1

/

8

×  3 ×

9

/

16

 in.) (excluding projecting parts 

and controls)

Approx. 84 g (3 oz) (including the built-in 
rechargeable battery)

1)

The LINE IN (OPT) jack is used to connect 
either a digital (optical) cable or a line 
(analog) cable.

2)

The i/LINE OUT jack connects either 
headphones/earphones or a line cable.

3)

Measured in accordance with JEITA.

US and foreign patents licensed from Dolby 
Laboratories.

Design and specifications are subject to change 
without notice.

4)

Measured in accordance with the JEITA 
(Japan Electronics and Information 
Technology Industries Association) standard.

5)

When using a 100% fully charged 

built-in 

lithiun-ion

rechargeable battery.

6)

When using a Sony LR6 (SG) “STAMINA” 
alkaline dry battery (produced in Japan).

AC power adaptor (1)
USB cradle (1)

Dedicated USB cable (1)
Dry battery case (1)

SonicStage, OpenMG and the OpenMG 
logo, MagicGate, Memory Stick and the 
MagicGate Memory Stick logo, 
Memory Stick and the Memory Stick 
logo, Net MD and the Net MD logo are 
trademarks of Sony Corporation.

Microsoft, Windows, Windows NT and 
Windows Media are trademarks or 
registered trademarks of Microsoft 
Corporation in the United States and /or 
other countries.

IBM and PC/AT are registered 
trademarks of International Business 
Machines Corporation.

Macintosh is a trademark of Apple 
Computer, Inc. in the United States and/
or other countries.

MMX and Pentium are trademarks or 
registered trademarks of Intel 
Corporation.

All other trademarks and registered 
trademarks are trademarks or registered 
trademarks of their respective holders.

™ and ® marks are omitted in this 
manual.

0