Sony D-NE321CK Benutzerhandbuch

Seite von 35
Replacing the fuse of the 
car battery cord
If the CD player does not operate, check the 
fuse. If it is blown, replace it as follows:
1
  Turn off the CD player and remove 
the cigarette lighter plug from the 
cigarette lighter socket.
2
  Remove the plug end by turning it 
counterclockwise.
3
  Remove the defective fuse from the 
plug.
4
  Insert a new fuse into the plug.
5
  Replace the plug end by turning it 
clockwise.
Remove
Fuse
Plug end
Cigarette lighter plug
Notes
•  Be sure to use a fuse of the same amperage and 
length as the one to be replaced. Never use a piece 
of wire as a substitute for the fuse.
•  If the fuse is blown again after replacing it, contact 
your nearest Sony dealer. In such a case, bring the 
defective fuse to the dealer with you.
Notes on the car connecting pack
•  If no sound is heard or the car connecting 
pack is ejected, change the direction of 
playback on the car cassette deck.
•  Never insert the cord end of the car 
connecting pack into the cassette insertion 
door. Otherwise, the cord may break or the 
car cassette deck may be damaged.
•  You cannot use the car connecting pack 
with some car cassette deck.
•  The cord should be placed so that it does 
not hinder driving.
•  To disconnect the cord from the CD player, 
pull it out by grasping the plug. Never pull 
the plug out by the cord.
•  With some car cassette decks, you may 
hear some rattling noise from the car 
connecting pack. However, this is not a sign 
of malfunction.
Mounting the rotary 
commander
If you use the supplied rotary commander, 
you can control your CD player as easily as 
you would control the headlight or the wiper
switch of your car while driving.
Attach the rotary commander to a flat place
as illustrated below.
Continued 
11
Getting Started
D-NE321CK/NE326CK.GB.2-318-870-11(1)