Sony network walkman nw-hd3 Benutzerhandbuch

Audio data is transferred back 
to your computer and remaining 
transferable count increases 
without operations occasionally 
when the player is connected to 
the computer.

 If a track is deleted from the player using the SonicStage 

software installed on a computer other than the one used 
for transfer to the player, the track will be transferred back 
automatically when the player is connected to the computer that 
you used for transfer to the player. Therefore, the remaining 
transferable count increases automatically.

The operation of the player 
becomes unstable while it is 
connected to the computer.

 A USB hub or USB extension cable is used. Connecting via 

a USB hub or USB extension is not guaranteed. Connect the 
USB cable directly to the computer.

“Failed to authenticate Device/
Media.” is displayed on the 
computer screen when the player 
is connected to the computer.

 The player is not connected to the computer properly. Quit 

the SonicStage software and verify the connection of the USB 
cable. Restart the SonicStage software.

There is no beep sound when the 
player is operated.

 “Beep” is set to “Off.” Set it to “On” ( page 30).

The player or the USB adaptor 
gets warm.

 The player and the USB adaptor may get warm when the 

battery is being charged and just after charging because of 
quick charge. Besides, the player and the USB adaptor may get 
warm when transferring a large number of tracks. Leave the 
player aside for a while. 

The sound is heard from the inside 
of the player. The player shakes.

 When the built-in hard disk of the player moves, the sound of 

operation may be heard, and the vibration of the player occurs. 
This is not a malfunction.

 GB