Sony NWD-B103 Benutzerhandbuch

NWD-B103 / B105 / B103F / B105F. GB. 3-210-125-11(1)

On the remaining battery indication

The battery icon in the display ( page 21) changes as shown below. See  page 67 for

details on battery duration.

The battery power gets low as shown in the battery icon. If “LOW BATTERY” appears, you

cannot operate the player. In this case, charge the battery by connecting to your computer.

Notes

• Charge the battery in an ambient temperature of between 5 to 35 ºC.

• The number of times the battery can be recharged before it is used up is approximately 500 times.

This number differs, depending on the conditions under which you use the player.

• The battery indicator on the display is only an estimate. For example, one section of black in the

indicator will not always indicate exactly one-fourth of the battery’s charge.

• “DATA ACCESS” appears in the display while the player accesses the computer. Do not disconnect

the player while “DATA ACCESS” appears or the file being transferred may be destroyed.

• When disconnecting the player from your computer, follow the procedure below.

 Double-click

(Remove Hardware) in the task tray in the lower right portion of the screen. In

the windows that appears, click [USB Mass Storage Device] or [USB Disk], and then click [Stop].

 Click [OK].

 When “Safe To Remove Hardware” appears on the screen, disconnect the player from the

computer.

The icon and the messages displayed may be different depending on the installed OS.

• The control buttons on the player are all disabled while it is connected to a computer.

• Some USB devices connected to the computer may interfere with the proper operation of the player.

• We do not guarantee the recharge of the battery using personally assembled computers or modified

computers.

Basic Operations (continued)

Transferring Music Manually

Connect the player to your computer and transfer an audio file to the player.

Note

• Only MP3/WMA files can be played on the player ( page 65).

Connect the player directly to a USB port on your computer.

If the screen for selecting what you want Windows to do appears, select [Open folder

to view files] and click [OK], and then go to step 3.

Double-click [My Computer] - [WALKMAN] or [Removable Disk].

Open the folder ([My Music], etc.) from where you want to transfer the

audio files, and then drag and drop them onto the player’s drive.

The audio files are transferred to the player.

You can also transfer files to the player by dragging and dropping a folder.

To delete songs transferred to the player

Connect the player to your computer, and then delete any unnecessary audio files using

Windows Explorer.

Continued 

Basic O

per

ations