Sony SCD-X501ES Benutzerhandbuch
6
GB
Pull out the insulating sheet to allow power
to flow from the battery.
to flow from the battery.
The remote already contains a battery.
Replacing the battery in the
remote
remote
1
Slide out the battery case in the direction of
arrow 2 by pushing the lock in the direction
of arrow 1 and then remove the battery
from the battery case.
arrow 2 by pushing the lock in the direction
of arrow 1 and then remove the battery
from the battery case.
2
Insert a new lithium battery CR2025 with the
+ side facing up.
+ side facing up.
3
Slide the battery case back in.
Note
If you do not use the remote for a long period of time,
remove the battery to avoid possible damage from
battery leakage and corrosion.
remove the battery to avoid possible damage from
battery leakage and corrosion.
Notes on lithium battery
• Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
consult a doctor.
• Wipe the battery with a dry cloth to assure a good
contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Note
Do not expose the remote sensor
to direct sunlight
or lighting apparatus. Doing so may cause a
malfunction.
malfunction.
Tip
When the remote can no longer operate the system,
replace the battery with a new one.
replace the battery with a new one.
Getting Started
Preparing the remote
A lithium battery CR2025
WARNING
Battery may explode if you mistreated.
Do not recharge, disassemble or dispose of in fire.