Sony SNCDH110W Benutzerhandbuch
CGI Command Manual
48
RelativeZoom, SolidPTZ, SolidPTZ1, SolidPTZ2, SolidPTZMode, SolidPTZTiltDirection, VisiblePanRange, VisibleTiltRange
When a connected analog camera supports it, SNT-EX101/101E/104/154 can use the following CGI command.
♦ Move, Cancel, PanTiltMaxVelocity, ZoomMaxVelocity, AutoFlip
11.5 Focus/Zoom
Parameter
Value
InqParm
SetCGI
Ver
Note
FzMove
"<zoom>,<speed>"
-
focuszoom.cgi
1.00
The movement of a zoom of the lens is started.
<zoom>:”tele”/”wide”
FzMove
"<focus>,<speed>"
-
focuszoom.cgi
1.00
The adjustment of the focus of the lens is started.
<focus>:”far”/”near”
FzMove
"onepushaf,<speed>"
-
focuszoom.cgi
1.00
One push auto focus is begun.
FzMove
"stop,<mode>"
-
focuszoom.cgi
1.00
A zoom or focus adjustment is stopped.
<mode>:”zoom”/”focus”
"zoom" : A zoom movement is stopped. A focus stops when a focus follows a
zoom, too.
"focus" : Focus adjustment is stopped. It doesn't stop when a focus follows a
zoom.
It is effective only in the movement by FzMove. A movement by the
FzAbsolute/FzRelative command doesn't stop.
FzInitialize
"on"
-
focuszoom.cgi
1.00
A zoom and a focus are made condition in the factory default.
FzAbsoluteZoom
"<zoom>"
focuszoom focuszoom.cgi
1.00
It has a zoom in the position absolutely. A focus doesn't follow it.
<zoom>: 0 - 1599 ( Integer)
FzAbsoluteFocus
"<focus>"
focuszoom focuszoom.cgi
1.00
It is adjusted to the position to specify a focus.
<focus>:
・SNC-CH140/220/240/260/280: 0 – 899 ( Integer)