Sony tsl-s11000 Benutzerhandbuch
26
Chapter 3
Operation
How to Use the DDS Auto Loader Unit
1
Press the POWER switch on the front panel.
The power turns on and the POWER indicator lights.
Self-testing starts: the BUSY indicator and the TAPE indicator should
each light briefly.
The power turns on and the POWER indicator lights.
Self-testing starts: the BUSY indicator and the TAPE indicator should
each light briefly.
2
Ensure that the BUSY and TAPE indicators are off, then insert the
magazine.
magazine.
SELECT
ENTER
BUSY
TAPE
EJECT
Inserting the magazine
When the magazine is loaded, the following actions occur:
• After “Magazine Loading” appears, checking of the magazine starts.
• If the magazine is write-protected, the write-protect indicator (
• After “Magazine Loading” appears, checking of the magazine starts.
• If the magazine is write-protected, the write-protect indicator (
) appears.
• All cartridges are checked in order.
• As each cartridge is checked, its number blinks.
• As each cartridge is checked, its number blinks.
Note
When Autoload is set to ON by the Menu screen and a magazine is inserted,
the first cartridge is loaded into the DDS drive automatically after the
cartridges within the magazine have been checked.
When Autoload is set to ON by the Menu screen and a magazine is inserted,
the first cartridge is loaded into the DDS drive automatically after the
cartridges within the magazine have been checked.
3
When all cartridge numbers display on the LCD, a cartridge to be loaded
into the DDS drive may be selected by computer software or by the
SELECT or ENTER buttons on the machine. When a cartridge is loaded
into the DDS drive, the TAPE indicator lights.
into the DDS drive may be selected by computer software or by the
SELECT or ENTER buttons on the machine. When a cartridge is loaded
into the DDS drive, the TAPE indicator lights.
4
Data may be read or written on the tape using computer software. While
reading or writing, the BUSY indicator lights.
reading or writing, the BUSY indicator lights.