Sony VGP-MR100 Benutzerhandbuch

14

The steps necessary to prepare the unit for use differ, depending on whether a wireless LAN or a
network cable is used to connect to the computer.

c Page 15

The remote control is necessary for operating of the Network Media Receiver.

c Page 18

Select a suitable connector and cable according to the requirements of the TV monitor. It is also
possible to make the connection to the TV via a VCR.

c Page 21

Connect the Network Media Receiver to the computer using a network cable. When using a
wireless connection, this step is not required.

c Page 29

Connect the supplied AC adapter to the Network Media Receiver to supply power.

c Page 30

When the Network Media Receiver is to be connected to the computer via a wireless
connection, without using a network cable, several wireless LAN settings must be configured.
When using a network cable connection, this step is not required.

c Page 33

Depending on the network environment, some settings of the Network Media Receiver may
have to be changed, setting whether to obtain an IP address automatically or use a fixed address.
The default setting is “Automatic assignment (using router)”.

c Page 35

The computer must be configured to share its photos, video, and music.
When using a VAIO computer, the VAIO Media software must be configured.
When using a different kind of computer, corresponding settings must be configured.