Sony XR-C7220 Benutzerhandbuch

Locating a disc by name

— List-up (For a CD unit with the custom
file function or an MD unit)

You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD” (page 18).

Press (LIST).
The name assigned to the current disc
appears in the display.

When you assign a disc memo label to a CD
TEXT disc, it takes priority over the original
CD TEXT information.

Press (LIST) repeatedly until you find the
desired disc.

Press (5) (ENTER) to play the disc.

Notes
• After a disc name has been displayed for five

seconds, the display goes back to normal
playback mode. To turn off the display, press
(DSPL).

• The track names are not displayed during MD or

CD TEXT disc playback.

• If there are no discs in the magazine, “NO DISC”

appears in the display.

• If a disc has not been assigned a custom file,

“********” appears in the display.

• If the disc information has not been read by the

unit, “NOT READ” appears in the display. To load
a disc, first press the number button, then choose
the disc that has not been loaded.

• There are also some letters which cannot be

displayed (during MD or CD TEXT disc playback).

Erasing the disc memo

Press (SOURCE) repeatedly to select CD.

Press (MODE) repeatedly to select the CD
unit.

Press (LIST) for two seconds.

Press (DSPL) for two seconds.

Rotate the dial to select the name you
want to erase.

Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.

Press (LIST) for two seconds.
The unit returns to normal CD playback
mode.

Note
When a personalized label is erased, the original
CD TEXT information will appear in the display.