Sony XR-C6090 Benutzerhandbuch
14
EN
3
Repeat step 2 to set the “PLAY” to “SKIP”
mode on all the tracks.
mode on all the tracks.
4
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
mode.
Notes
• You can set the “SKIP” mode on up to 24 tracks.
• You cannot set the “SKIP” mode on all the tracks.
• You can set the “SKIP” mode on up to 24 tracks.
• You cannot set the “SKIP” mode on all the tracks.
Playing the specific tracks only
You can select:
•BANK-ON to play the tracks with “PLAY”
•BANK-ON to play the tracks with “PLAY”
setting.
•BANK-INV (inverse) to play the tracks with
the “SKIP” setting.
1
During playback, press (4).
“BANK” appears on the display.
“BANK” appears on the display.
2
Press (4) to select the desired mode.
Each time you press (4), the display
changes as follows:
Each time you press (4), the display
changes as follows:
z BANK-ON
z BANK-INV
z BANK-OFF
Playback starts from the track following the
current one.
current one.
To go back to the normal playing mode, select
“BANK-OFF” in step 2.
“BANK-OFF” in step 2.
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
The name assigned to the disc currently
playing appears in the display.
2
Press (LIST) repeatedly until you find the
desired disc.
desired disc.
3
Press (PRESET/DISC) to play back the
disc.
disc.
Notes
• Once a disc name has been displayed for five seconds, the
• Once a disc name has been displayed for five seconds, the
display goes back to its normal playback mode. To turn
off the display, press (DSPL).
off the display, press (DSPL).
• If there are no discs in the magazine, “NO DISC”
appears in the display.
• If a disc has not been assigned a custom file, “********”
appears in the display.
• If the disc information has not been read by the unit,
“NOT READ” appears in the display. To load the disc,
first press the number button, then choose the disc that
has not been loaded.
first press the number button, then choose the disc that
has not been loaded.
• The information is appears only in upper cases.
Selecting the specific
tracks for playback
tracks for playback
— Bank
(CD unit with custom file function)
(CD unit with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
skip tracks and play only the tracks you want.
1
Start playing the disc and press (LIST)
for two seconds. Then press (LIST)
momentarily.
for two seconds. Then press (LIST)
momentarily.
Bank edit mode
Note
If you have not labeled the disc, you cannot use this
function. For more information on “Labelling a CD”,
refer to page 13.
If you have not labeled the disc, you cannot use this
function. For more information on “Labelling a CD”,
refer to page 13.
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (SEL).
the track number you want to skip and
press (SEL).
The indication changes from “PLAY” to
“SKIP.” If you want to return to “PLAY,"
press (SEL) again.
“SKIP.” If you want to return to “PLAY,"
press (SEL) again.
5 1
CD2
DISC
TRACK
5 3
CD2
DISC
TRACK
BANK ON
CD1
BANK
L4