Panasonic PT-LC80U Benutzerhandbuch
AUTO RGB IN
E
NGLISH
-27
Useful
functions
26-E
NGLISH
Correcting keystone distortion and
automatic positioning (AUTO SET UP)
automatic positioning (AUTO SET UP)
This projector detects its degree of tilt and the input signal. Keystone distortion and the
position of the image can then be corrected automatically in accordance with the input signal.
position of the image can then be corrected automatically in accordance with the input signal.
Turning off the picture and sound
momentarily (SHUTTER)
momentarily (SHUTTER)
The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
ENTER
FREEZE
SHUTTER
INDEX
WINDOW
PROJECTOR
VOLUME
D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
ENTER
FREEZE
INDEX
WINDOW
PROJECTOR
VOLUME
D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
SHUTTER
ENTER
INDEX
WINDOW
PROJECTOR
VOLUME
D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
SHUTTER
FREEZE
Projector control panel
Press the AUTO SETUP button.
(When the projected image has caused keystone distortion)
(When the projected image has caused keystone distortion)
B Automatic positioning
will be carried out.
Still picture
Screen
Projected
image
image
If you press the AUTO SETUP button, the items given in the table below will
be set automatically in addition to keystone distortion being corrected. The
setting details change according to the signal which is being input.
be set automatically in addition to keystone distortion being corrected. The
setting details change according to the signal which is being input.
B The picture being projected will be paused.
B Press the FREEZE button again to cancel the
B Press the FREEZE button again to cancel the
still picture.
[
NOTE:
B If the edges of the projected picture are indistinct, or if a dark picture is being
B If the edges of the projected picture are indistinct, or if a dark picture is being
projected, the automatic setup processing may stop automatically before it is
complete. If this happens, project a different picture and then press the AUTO
SETUP button once more, or make the above adjustments manually.
complete. If this happens, project a different picture and then press the AUTO
SETUP button once more, or make the above adjustments manually.
B If you would like to make further adjustments to the picture, use the menu
commands which are listed on page 30 and subsequent pages.
B Set “AUTO KEYSTN” in the OPTION1 menu to “OFF” to prevent any deterioration
of the picture as a result of keystone correction. (Refer to page 42.)
Press the SHUTTER button.
B The picture and sound will be turned off.
B Press any button on either the projector or
B The picture and sound will be turned off.
B Press any button on either the projector or
remote control unit to return to normal operating
mode.
mode.
Press the FREEZE button.
NOTE:
B “SHUTTER” on the MAIN MENU is the same
B “SHUTTER” on the MAIN MENU is the same
function.
Pausing a picture (FREEZE)
Input signal
Contents set up automatically
POSITION, DOT CLOCK, CLOCK PHASE
(If the dot clock frequency is 100 MHz or higher, the DOT
CLOCK and CLOCK PHASE will not be set automatically.)
(If the dot clock frequency is 100 MHz or higher, the DOT
CLOCK and CLOCK PHASE will not be set automatically.)
AUTO RGB IN
RGB signals
YP
B
P
R
signals
Page
38
42
42