Epson LQ-2170 Benutzerhandbuch
Connecting the Printer to Your Computer
If the self test printed correctly, you are ready to connect your
printer to the computer. Use a 36-pin cable to connect your
computer to your printer’s built-in parallel interface. Follow these
steps:
printer to the computer. Use a 36-pin cable to connect your
computer to your printer’s built-in parallel interface. Follow these
steps:
1.
Make sure both the printer and computer are turned off; then
plug the cable connector securely into the printer’s parallel
interface connector. Squeeze the wire clips together until they
lock in place on either side of the connector.
plug the cable connector securely into the printer’s parallel
interface connector. Squeeze the wire clips together until they
lock in place on either side of the connector.
Note:
If your cable has a ground wire, connect it to the ground connector
beneath the interface connector.
beneath the interface connector.
2.
Plug the other end of the cable into the computer. (If there is a
ground wire at the computer end of the cable, attach it to the
ground connector at the back of the computer.)
ground wire at the computer end of the cable, attach it to the
ground connector at the back of the computer.)
1-16
L
Sunflower-E
Rev.D
A5 size Chapter 1
02/5/96
pass 1
1-14
Setting Up the Printer