Socket Mobile 10-100 Benutzerhandbuch
2 | Setup
This chapter explains how to set up and use the 10/100
Ethernet CF Card on a Pocket PCs, Handheld PCs, and
pen tablets running:
Ethernet CF Card on a Pocket PCs, Handheld PCs, and
pen tablets running:
-
Windows Mobile 5.0
-
Windows Mobile 2003/2003SE
-
Windows CE 2.11 or 3.0
Setup Summary
STEP 1: Prepare network information.
STEP 2: Install the software.
STEP 3: Enter network settings.
STEP 4: Insert card and connect to LAN port.
STEP 2: Install the software.
STEP 3: Enter network settings.
STEP 4: Insert card and connect to LAN port.
OPTIONAL: Use ActiveSync over a Network
OPTIONAL: Use the Control Panel Applet
OPTIONAL: Use the Control Panel Applet
STEP 1: Prepare Network Information
Contact your network administrator for the network settings. A text-only form
that you can email to your network administrator is available in the Docs folder
in the installation CD and online at:
that you can email to your network administrator is available in the Docs folder
in the installation CD and online at:
Does the network support DHCP
(Dynamic Host Configuration Protocol)
?
YES. If Yes, then what is the valid range of IP addresses for your network?
_______________________________________________________
NO. If No, then please any of the following IP addresses required by
your network (you may need only some):
(a) Mobile Computer IP address: _____ . _____ . _____ . _____
(b) Subnet Mask: _____ . _____ . _____ . _____
(c) Default Gateway: _____ . _____ . _____ . _____
(d) Primary DNS: _____ . _____ . _____ . _____
(e) Secondary DNS: _____ . _____ . _____ . _____
(f) Primary WINS: _____ . _____ . _____ . _____
(g) Secondary WINS: _____ . _____ . _____ . _____
CHAPTER 2: SETUP | 5