TP-LINK TD-W8960N Benutzerhandbuch

The Router's ports, where the cables are connected, and RESET button are located on the back 
panel. 

 

Figure 1-2 

¾

  LINE: Connect to the Modem Port of Splitter or to the telephone line. 

¾

  1, 2, 3, 4 (LAN): The ports (1, 2, 3, 4) connect the Router to the local PC(s). 

¾

  Reset Button: There are two ways to reset the Router's factory defaults. 

1) Use 

the 

 function on Management -> settings page in the router's 

Web-based Utility. 

2)  Use the Factory Default Reset button: With the Router powered on, use a pin to press 

and hold the Reset button (more than 5 seconds) until the Internet LED becomes 
quick-flash from slow-flash. And then release the button and wait the Router to reboot to 
its factory default settings. 

¾

  POWER: The Power plug is where you will connect the power adapter. 

¾

  ON/OFF: The switch for the power. 

¾

  Wireless antennas: To receive and transmit the wireless data. 

5