Honeywell RTH6350 Benutzerhandbuch

SETUP

WIRING

ASSIST

ANCE

TROUBLESHOOTING

•  Press 

SYSTEM button to set system 

to Heat. Make sure the temperature 
is set higher than the Inside 
temperature.

•  Press 

SYSTEM button to set system 

to Cool. Make sure the temperature 
is set lower than the Inside 
temperature.

•  Check circuit breaker and reset if

necessary.

•  Make sure power switch at heating

& cooling system is on.

•  Make sure furnace door is closed

securely.

•  Wait 5 minutes for the system to

respond.

•  Compressor protection feature is 

engaged. Wait 5 minutes for the 
system to restart safely, without 
damage to the compressor.

•  Check Function 2: Heat Pump 

Changeover Valve to make sure 

it is properly configured for your 

system (see page 15).

•  Check Function 1: System Type to 

make sure it is set to match your 

heating and cooling equipment 

(see page 14).