Daewoo dhr-9105p Benutzerhandbuch
RECORDING
45
Recording from an External Input
Recording from an External Input
You can record from an external component, such
as a camcorder, VCR or Digital Camera, connected
to any of the HDD/DVD Recorder’s external inputs.
as a camcorder, VCR or Digital Camera, connected
to any of the HDD/DVD Recorder’s external inputs.
1
Make sure the component you want to record
from is connected properly to the HDD/DVD
Recorder; see pages 15~17.
2
Use [PR+/–] or [INPUT] to select the external input
to record from.
3
Load a recordable disc if you are recording onto
a DVD. And then select HDD or DVD to record.
When you load a new, blank recordable disc
(DVD±RW, DVD±R), the recorder will take a
moment to initialize it for recording.
(DVD±RW, DVD±R), the recorder will take a
moment to initialize it for recording.
4
Set the desired Recording mode by pressing [REC
SPEED] repeatedly.
Available disc (or HDD) space will be displayed
by selecting recording mode.
by selecting recording mode.
5
Press [REC (
●
)] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc (or HDD) is full.
To record for a fixed length of time, see ‘One
Touch Record‘ on page 40.
the front panel display.
Recording continues until you press [STOP] or
the disc (or HDD) is full.
To record for a fixed length of time, see ‘One
Touch Record‘ on page 40.
6
Press [STOP (
■
)] to stop recording.
Recording from External Components
You can record from a digital camcorder connected
to the DV IN jack on the front panel of the
HDD/DVD Recorder.
to the DV IN jack on the front panel of the
HDD/DVD Recorder.
1
Make sure your digital camcorder is connected to
the front panel DV IN jack; see page 17.
2
Press [DV] to select the DV input.
Recording from a Digital Camcorder
• If your source is copy-protected, you will not be
able to record it using the HDD/DVD Recorder.
See ‘Copyright Notice‘ on page 8 for more
details.
See ‘Copyright Notice‘ on page 8 for more
details.
DV Input screen appears. Then, if you select
'Yes', it will be changed to DV input.
'Yes', it will be changed to DV input.
3
Find the place on the camcorder tape from which
you want to start recording.
For best results, pause playback at the point
you want to start recording.
you want to start recording.
4
Press [REC] once to start recording.
Recording is automatically paused if the
HDD/DVD Recorder detects no signal. You can
pause or stop the recording by pressing
[PLAY/PAUSE] or [STOP].
You can select media you want to record as
pressing the [DVD] or [HDD].
HDD/DVD Recorder detects no signal. You can
pause or stop the recording by pressing
[PLAY/PAUSE] or [STOP].
You can select media you want to record as
pressing the [DVD] or [HDD].
DV Input
This will stop the Timeshifting
Buffer. Proceed?
Buffer. Proceed?
Yes
No
Instructions:
Enter-Confirm Setup-Exit Move
…†
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 45 mac001 1200DPI 100LPI