Macsense Connectivity xrouter mih-120 Benutzerhandbuch
Assigning TCP/IP Values Manually
If you already have a DHCP server on the network, or if you prefer
not using the XRouter’s DHCP server to assign TCP/IP values auto-
matically, you can input these values manually.
matically, you can input these values manually.
To enter values for the managing computer’s address manually:
1.
Click the IP Address tab from the TCP/IP properties window.
2.
In the IP Address field enter “192.168.1.x” where x is any
variable of your choice ranging from 2 - 252. Enter
255.255.255.0 in the Subnet Mask field.
variable of your choice ranging from 2 - 252. Enter
255.255.255.0 in the Subnet Mask field.
(NOTE: No two computers on the same LAN can have the
same IP address or an IP address conflict will occur.)
same IP address or an IP address conflict will occur.)
3.
Click the DNS tab and enter the DNS IP addresses provided
by your ISP in the DNS fields.
by your ISP in the DNS fields.
4.
Click the Gateway tab and enter a value in the Gateway IP
address field. The Gateway IP address value must be the
same as the XRouter's IP address; (the XRouter’s default IP
address is 192.168.1.1).
address field. The Gateway IP address value must be the
same as the XRouter's IP address; (the XRouter’s default IP
address is 192.168.1.1).
5.
After specifying the settings of TCP/IP click OK and restart
Windows to allow the settings to take effect.
Windows to allow the settings to take effect.
11