Mitsubishi m330 Benutzerhandbuch

62

If the phone is locked or if the PIN set-
ting is on, the phone returns to this
locked state after the alarm has rung

until you operate it.
If the alarm is acknowledged but not

validated the alarm indicators remain

on the display for up to 15 minutes (it

afterwards either goes back to its 'on'

or 'off' previous state).

To turn the alarm off:

The Infrared port

The infrared port allows the exchange of

data between the mobile and other devic-

es (provided they have an infrared port).

Via the infrared port you can download or

send files such as images for your wallpa-

per (see Pictures, page31 ), send or re-

ceive name cards,...

To initiate a transfer via the infrared port,

your mobile must be placed facing anoth-

er infrared port before port opening.

Both ports can then be opened and syn-

chronised. The requested transfer can be

performed. Objects (e.g name cards) are

transferred one by one.

Opening the infrared port

Opening the infrared port allows to
receive information via this port.
Once opened, the infrared port

can be used for any kind of trans-

fer (data, fax, file transfer,...). The

infrared port is automatically

closed after a while.

To open the infrared port:

Closing the infrared port

Closing the infrared port closes all 

infrared sessions.

To close the infrared port:

Transferring a name card via
the infrared port

You can transfer name via the in-

frared port: 

Press 

 

, or any other

key (except 

 

) to stop

the alarm. The alarm icons re-

main on the display and the
alarm re-starts ringing 3minutes
later.

or
Press Valid. 

 or 

 

 to ac-

knowledge and end the alarm
ringing.

1. If the Valid softkey is not pressed after the 3rd (and

final) alarm ringing the ringing is not repeated but
the phone remains on for 15 minutes. After those
15 minutes the phone reverts to its state before the
alarm sounded. 

2. If a call is on at alarm time a 'Call in progress' alert

beep sounds and a visual alert is displayed every 3
minutes. Validate or acknowledge the alarm the
usual way.  

Press 

.

 

Select 

.

Select 

 

.

Select 

. 

4

1

2
3

Press 

.

 

Select Tools.

Select Infrared port 

.

Select Open

. Confirmation

is displayed. 

 is displayed

on  top of the standby display

to confirm the port opening.

Press 

.

 

Select Tools.

Select Infrared port 

.

Select Close 

. 

Place your mobile opposite the

other device infrared port.
Open the other device infrared

port.
Select the card you wish to

transfer as explained in section

Viewing and calling phonebook

numbers, page14.
Select Options 

.

Select Send by IrDA 

. The

infrared port is opened and the

transfer is then performed.

1
2
3

1
2
3

1

2

3

4