Honeywell RLV4300 Benutzerhandbuch

4

TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN
POWER PANEL TO AVOID ELECTRICAL SHOCK.
• All cables and connections must comply with local electrical codes.
• This thermostat has tinned copper wires for line and load 

connections. Special CO/ALR solderless connectors must be used if 
these wires will be connected to aluminium conductors.

• Install the thermostat onto an electrical box.
• Install the thermostat about 1.5 m (5 feet) high, on an inside wall 

facing the heater.

• Avoid locations where there are air drafts (such as the top of a 

staircase or an air outlet), dead air spots (such as behind a door), or 
direct sunlight. 

• Do not install the thermostat on a wall that conceals chimney or stove 

pipes.

• The thermostat wires are not polarized; either wire can be connected 

to the load or to the power supply.

69-1918EF-03.book  Page 4  Wednesday, March 20, 2013  4:24 PM