Jacuzzi j-300 j-335 Benutzerhandbuch

40

Contact your authorized Jacuzzi dealer or qualified service technician.

Remove the spa's cover and allow your spa to cool down.

• 

Program the filter settings for Economy Mode (page 

• 

28). Raise water 

If the condition persists, contact your authorized Jacuzzi dealer.

• 

 

!

Water temperature is above acceptable limits. 

enTer spa! The safety “Watchdog” software has been 

triggered and the spa is deactivated. A problem has been 

detected which could cause damage to the spa or its components. 

Contact your authorized Jacuzzi dealer or qualified service technician.

In the event your Jacuzzi spa is not working the way it should, please 

first review all the installation and operating instructions in this manual 

and check for messages on the panel display. If you are still not satisfied 

it is working properly, please follow the appropriate troubleshooting 

instructions below. 

note: If any of the supply cords to accessories are damaged, they must 

be replaced by authorized service personnel. Contact your authorized 

Jacuzzi dealer or qualified service technician.

Check the following:

1.  Is there power to the spa?

2.  Is the household circuit breaker tripped?

3.  Contact your authorized Jacuzzi dealer or qualified service 

technician.

Press the JETS 1 button:

If no water movement is detected, make sure power is going to the spa 

and check the water level. If this does not solve the problem, contact 

your authorized Jacuzzi dealer or qualified service technician.

The main jets pump 1 operates but no water flows to jets. Check the 

following: