Honeywell 4500 Benutzerhandbuch

 

3 

As you can see from Figure 1 below, there are two controls and one 
indicator on the front panel of the 4500 thermostat: 

1

2

3

 

Figure 1.  4500 Thermostat Controls and Indicator 

This switch is used to set the control mode of the 4500 thermostat. 
The mode can be set to either HEAT or COOL. This is the same as 
found on most thermostats. For premises that only have heat or air 
conditioning but not both, the proper mode should be selected with 
this switch, and the setting should not be changed. 

This switch is used to activate and deactivate the 4500 thermostat. 
When this switch is set to the ACTIVE mode, the 4500 thermostat is 
able to set back the room temperature when the security system is 
ARMED AWAY. BYPASS is used to bypass the 4500 thermostat. 
When bypassed, the 4500 thermostat cannot change the room 
temperature.  

 

•  To use fan alone on your thermostat, put the 4500 in the BYPASS position. 
•  You will not be able to adjust room temperature by phone when the 4500 

thermostat front panel switch is in BYPASS position.