Honeywell RTH2310 Benutzerhandbuch
RTH2310 Programmable Thermostat
6
1)
Match each labeled wire with the terminal having
the same letter.
the same letter.
2)
Loosen the terminal screws using a screwdriver,
insert the wires, then tighten the screws.
insert the wires, then tighten the screws.
3)
Push any excess wire back into the wall opening.
Connect Wires (typical wiring)
5.
Remove jumper
if you have both
R and Rc wires.
if you have both
R and Rc wires.
Labels don’t match?
If a wire does not match any terminal on the thermostat,
see next page.
see next page.