Alpine X009-FD1 In-Dash Restyle System Benutzeranleitung

Seite von 251
20
-EN
3
Touch [Close], or press any button.
• If the disc does not eject after touching [c Disc], press and hold 
(Eject) for at least 5 seconds.
• Do not apply shock to the monitor when it is open as it may result in 
malfunction of the unit.
• The monitor will stop at the set tilt angle when closing.
Adjusting the Screen Viewing Angle
Adjust the screen’s angle for better visibility.
1
Press c (Eject).
The Open/Tilt screen is displayed.
2
Touch [
Up] or [
Down] of “Tilt” to adjust the 
desired screen angle.
The screen angle can be adjusted in 5 stages.
3
Touch [
] to return to the normal mode.
• The screen color will vary when viewed at certain angles. Adjust the 
screen angle for the best viewing position.
• If the voltage of the vehicle’s battery power is low, the screen may 
blink when the screen angle is changed. This is normal and not a 
malfunction.
Adjusting the Volume
Adjust the volume by pressing 
 or 
.
Volume decreases/increases continuously by pressing and 
holding  
or .
Volume: 0 - 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume 
level by 20 dB.
1
Press 
 to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing 
 again will bring the audio back to its 
previous level.
Using My Favorites
Display example of My Favorites screen
User name: Displays the name of the user
My Favorites icon: Touching an icon on My Favorites 
screen will switch to the screen for the selected 
application
Add button: Use to add (register) My Favorites icons 
(page 22)
Edit button: Use to edit My Favorites (page 22)
Camera button: Use to display the camera image 
(page 23)
Notification List button: Use to display the Notification 
List from Facebook in the connected Smartphone via 
this unit (page 25)
i-Personalize button: Use to configure the i-Personalize 
Setup (page 23)
CAUTION
Keep hands (or any other object) away from the monitor while it 
is opening or closing to avoid damage or injury. The back of the 
monitor tends to become very warm under normal operating 
conditions. This is not a malfunction, but care should be taken to 
avoid prolonged contact with it.
Common Operations