Sony HVL-F43M Benutzeranleitung
GB
14
Attachment and removal of the
flash unit
flash unit
Attaching the flash unit to the camera
• Before attaching to the camera, remove the protective cap from the terminal of the
Multi Interface foot of the flash unit and remove the shoe cap from the camera.
• When not using the flash unit, reattach the protective cap to the terminal of its
Multi Interface foot.
• If the built-in flash in the camera is protruding, lower it before attaching the
flash unit.
1
Turn off the power of the flash unit, and rotate the lock
lever towards [RELEASE] while pressing the release
button.
lever towards [RELEASE] while pressing the release
button.
2
Firmly insert the Multi Interface foot all the way into the
Multi Interface Shoe of the camera in the direction of
the arrow.
Multi Interface Shoe of the camera in the direction of
the arrow.
3
Firmly rotate the lock lever towards [LOCK] to secure
the flash unit.
the flash unit.
• This flash unit is suitable for a Multi Interface Shoe. When attaching this unit to
a camera that has an Auto-lock Accessory Shoe, use the Shoe Adaptor (ADP-
AMA) (not supplied).
AMA) (not supplied).