Samsung Sound+ HW-MS6500 Benutzeranleitung

ENG - 16

 

• BT READY : In this mode, you can search for previously connected TVs or connect to the Soundbar 

from a previously connected mobile device.

 

• BT PAIRING : In this mode, you can connect to a new device. (While in “BT” mode, press and hold the 

 (Source) button for more than 5 seconds on the right side of the Soundbar or on the remote 

control.)

 

• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

 

• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the 

Soundbar and the Bluetooth device exceeds 32.8 ft.

 

• The Soundbar automatically turns off after 5 minutes in the Ready state.

 

• The Soundbar may not perform Bluetooth search or connection correctly under the following 

circumstances:

 

– If there is a strong electrical field around the Soundbar.

 

– If several Bluetooth devices are simultaneously paired with the Soundbar.

 

– If the Bluetooth device is turned off, not in place, or malfunctions.

 

• Electronic devices may cause radio interference. Devices that generate electromagnetic waves 

must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

 

• The Soundbar supports SBC data (44.1kHz, 48kHz).

 

• Connect only to a Bluetooth device that supports the A2DP (AV) function.

 

• You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) 

function.

 

• Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar 

MSxxxx” from the device’s scanned devices list will automatically change the Soundbar to “BT” 
mode.

 

– Available only if the Soundbar is listed among the Bluetooth device’s paired devices.  

(The Bluetooth device and the Soundbar must have been previously paired at least once.)

 

• The Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is 

displaying “BT READY”.