AMBER Wireless GmbH F162000010 Benutzerhandbuch
ERGOcom 3
5 Operation
|
5.3 Operation, with display interface (comfort/excellence)
or
▶ Press the footswitch again to return to live image display and activate the next
image (1-4) as a live image.
5.3.7 Save still
Prerequisite
● TheERGOcom 3 is connected to a PC fitted with a grabber card by means of a
USB cable.
● On this PC, the KaVo Display Interface System software is installed.
▶ Hold down the Freeze button for > 2 seconds.
The successful save is indicated on Display 1 with save.
or
▶ Hold down the footswitch for > 2 seconds.
The successful save is indicated on Display 1 with save.
Note
Saving the active image (image number is white) is possible in Full Screen and
Quad mode for the display.
The still is saved on the PC and on the internalERGOcom 3 USB drive as long as
on is selected for USBpict.store.
5.3.8 Change display view
Prerequisite
A video signal is shown on Display 1.
Images on Display 1 can be toggled between Full Screen mode and Quad mode.
▶ Press the Full Screen /Quad Mode button.
42/56