Rohde & Schwarz Inc NV830X Benutzerhandbuch
Chapter 8
Service
2098.0188.72
- 8.12 -
E-1
4.4
Replacing Automatic Line Fuses
4.4.1
Removing Automatic Line Fuse
Note
Before removing an automatic line fuse, the power distribution board must be removed (see
"Removing the Power Distribution Board").
"Removing the Power Distribution Board").
To remove the automatic line fuse proceed as follows:
1. Remove the power distribution board.
2. From above, grip the back of the automatic line fuse you wish to remove and undo the
white plastic springs.
3. Remove the automatic line fuse.
WARNING!
Always make sure that the power supply is disconnected before commencing any service
work on the transmitter rack. This will prevent injury due to electric shock and avoid dam-
age to the instruments.
work on the transmitter rack. This will prevent injury due to electric shock and avoid dam-
age to the instruments.