Rohde & Schwarz Inc NV830X Benutzerhandbuch
Chapter 8
Service
2098.0188.72
- 8.25 -
E-1
1. Using a Torx screwdriver No. 20, remove the rear panel of the rack.
2. Disconnect the RF connecting cables
W1
,
W2
and
W3
to the splitter-combiner unit.
3. Using a Torx screwdriver No. 20 remove all six fixing screws.
4. Pull the absorber unit from the rackmount air outlet duct.
Fig. 18
Removing the absorber
7.2.2
Installing Absorber
To install the unit in the transmitter, reverse the procedure used to remove it.