DTC Communications Inc. DSS900TX Benutzerhandbuch
Quickstart: DSS-900-KT Surveillance System
DSS-900-KT Digital Spread Spectrum Surveillance System
1
Quickstart: DSS-900-KT Surveillance System
Quickstart guides the experienced surveillance professional in rapid setup
and use of the DSS-900-KT. The following table guides you through set up of
the TX, RX and recording functions of the DSS-900-KT.
and use of the DSS-900-KT. The following table guides you through set up of
the TX, RX and recording functions of the DSS-900-KT.
Step
No.
Step Reference
Quickstart Action
For Details
See Page
1.
Select power
source.
source.
Connect the RX to either an
external AC or DC source.
external AC or DC source.
6
2.
Install RX antenna.
Connect directional high-gain
patch antenna, or omni-
directional disguised cellular
magnetic mount antenna to RX.
patch antenna, or omni-
directional disguised cellular
magnetic mount antenna to RX.
12
3.
Choose agent’s
microphone.
microphone.
Use the built-in top fire mike on
the TX, or plug in one of the
external mikes.
the TX, or plug in one of the
external mikes.
13
4.
Get a tape.
Load tape into the Marantz.
Make sure that:
Make sure that:
• The tape is fully rewound.
• You are not about to
overwrite an existing
recording.
recording.
• The tape is not write
protected.
8
5.
Enable recorder.
Turn the Marantz power ON.
14
6.
Select headsets or
the speaker.
the speaker.
Decide to use the speaker, or
plug one or two headsets into the
matching jacks. This disables the
speaker.
plug one or two headsets into the
matching jacks. This disables the
speaker.
9
7.
Turn TX on.
Slide TX power to ON.
13, 14
8.
Set sound intensity.
Set the
VOLUME
to mid-range.
7