Samsung ME46B Benutzerhandbuch

Seite von 213
136
Network
7
7 Network
7.1.3
Connecting to a Wireless Network
To connect your product to your wireless network, you need a wireless router or modem and a Samsung 
Wireless LAN adapter (WIS10ABGN, WIS12ABGNX), which you connect to your product back or side 
panel USB port. See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce 
sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n 
communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a 
network connection, the video may not play smoothly.
 
z
You must use the “Samsung Wireless LAN adapter” (WIS10ABGN, WIS12ABGNX) to use a 
wireless network.
z
The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are 
offered by select retailers, Ecommerce sites, and Samsungparts.com.
z
To use a wireless network, your product must be connected to a wireless IP sharer (either a router 
or a modem). If the wireless IP sharer supports DHCP, your product can use a DHCP or static IP 
address to connect to the wireless network.
z
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the 
wireless IP sharer is currently being used by another device nearby, this will result in interference 
and communication failure.
z
Your product supports only the following wireless network security protocols:
†
Authentication Mode : WEP, WPAPSK, WPA2PSK
†
Encryption Type : WEP, TKIP, AES.
z
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to 
WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung product will not 
support a connection in compliance with new Wi-Fi certification specifications.
z
If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via 
PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically 
configure the SSID and WPA key in either mode.
z
If your router, modem, or device is not certified, it may not connect to the product via the 
“Samsung Wireless LAN adapter.”
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
LAN Cable
Product Panel
Samsung Wireles LAN Adapter