Omnitron FlexPoint GX/T 4719-1 Merkblatt
Produktcode
4719-1
FlexPoint
FlexPoint
TM
FlexPoint
GX/T
10/100/1000 UTP to 100/1000X Ethernet Media Converter
The FlexPoint GX/T is a 10/100/1000BASE-T UTP to
1000BASE-X modular fiber media converter that supports
jumbo frames up to 10,240 bytes. The GX/T features Small Form
Pluggable (SFP) transceivers that support both 100BASE-FX
and 1000BASE-X for interoperability with Gigabit and Fast
Ethernet fiber equipment. SFP transceivers enable adaptability
to different fiber types, speed and distances, and support
Coarse Wave Division Multiplexing (CWDM) technology to
increase the bandwidth capacity of fiber infrastructure.
The FlexPoint GX/T also supports SC and ST fixed fiber
The FlexPoint GX/T also supports SC and ST fixed fiber
connectors for multimode, single-mode fiber; and single-mode
single-fiber models are available.
Both the fiber port and the UTP port support auto-negotiation,
Both the fiber port and the UTP port support auto-negotiation,
an IEEE standard which defines how all the communicating
devices automatically perform their configuration functions.
Auto-negotiation achieves the best possible mode of
operation (speed, duplex mode and Pause mode) between
the devices.
The auto-negotiation feature can be disabled on both ports
The auto-negotiation feature can be disabled on both ports
(for manual configuration) using DIP-switches on the product.
This is useful in a situation where the GX/T is connected to a
non-negotiating device and the configuration parameters must
be set manually.
Network flow control is managed by the Pause function
Network flow control is managed by the Pause function
(configured via auto-negotiation or manually) that prevents
network congestion on both the UTP and fiber ports. When
Pause is enabled and the device is experiencing network
congestion, it will send out a Pause signal to its link partner,
instructing it to slow down data transmission.
A variety of testing and fault detection tools are provided for
A variety of testing and fault detection tools are provided for
easy installation and troubleshooting. The GX/T supports
Port Loop-Back, IEEE defined Far-End-Fault and Link Fault
bit as Remote Fault indicators. The GX/T generates a remote
fault indicator when it detects link fault conditions, and reports
detection of these signals by displaying status on the LED.
Through user DIP-switch configuration, the detection of these
indicators or link modes can also be propagated to the other
port on the GX/T as a means of notifying connected end-
devices of the link fault.
Diagnostic data is provided through LED indicators that assist
Diagnostic data is provided through LED indicators that assist
in network installation and maintenance. The LEDs report the
availability of power, port activity and link status and duplex mode.
The GX/T supports a wide input voltage range of 5 to 32VDC
The GX/T supports a wide input voltage range of 5 to 32VDC
for flexibility to power the device from a variety of sources.
GX/T modules can be standalone or surface-mounted utilizing
GX/T modules can be standalone or surface-mounted utilizing
optional wall-mounting hardware or DIN-rail mounting brackets.
They can also be rack-mounted in a 5-Module shelf or in a
high-density 14-Module, power-redundant chassis.
The FlexPoint GX/T is a 10/100/1000 copper to
■
100/1000* modular fiber media converter
Conforms to 10BASE-T, 100BASE-TX, 1000BASE-T,
■
100BASE-FX* and 1000BASE-X specifications
Fiber port supports multimode and single-mode fiber
■
with ST and SC connectors and single-fiber with SC
connectors
Supports dual fiber and single-fiber 100BASE-FX or
■
1000BASE-X SFP transceivers for standard or CWDM
wavelengths
Both the fiber and UTP ports support auto-negotiation
■
Provides Remote Fault Indicators to signal loss of link
■
for Far-End Fault and Link Fault conditions
UTP port supports 10/100/1000Mbps and Half/Full-
■
Duplex
Auto or manually configured Pause function for flow
■
control
Supports jumbo frames up to 10,240 bytes
■
Loopback mode supports end-to-end testing
■
User-selectable Link Modes for quick fault detection
■
Diagnostic and DIP-switch configurations are displayed
■
with status LEDs for quick and easy installation
Tabletop, wall-mounted, rack-mounted in a 5-Module
■
shelf or in a 14-Module power-redundant chassis
options
Lifetime Warranty and free 24/7 Technical Support
■
Key Features
* 100BASE-FX is supported on SFP models only