Altronix AL600UL3X Merkblatt

• This Altronix triple output access control power supply/charger is 

specifically designed for use with access control systems and 
accessories. This unit converts a 115VAC / 60Hz input into 
three individually circuit breaker protected 5VDC, 12VDC and 24VDC 
regulated outputs (see specifications). 

• 5VDC, 12VDC, 24VDC selectable outputs.
• 5VDC @ 1.75 amp continuous supply current.
• 12VDC @ 1.75 amp continuous supply current.
• 24VDC @ 3 amp continuous supply current.
• Three (3) PTC protected outputs. 
• Class 2 rated (5VDC and 12VDC outputs).
• Input 115VAC / 60Hz, 1.9 amp.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or 

gel type batteries. 

• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when

AC fails (zero voltage drop).

• AC fail supervision (form "C" contacts). 
• Low battery supervision (form "C" contacts). 
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:

- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH batteries.

Rev. DSAL600UL3X - A17F

UL 294

UL Listed for Access Control 
System Units.

UL 1481 UL Listed Standard for Safety for

Fire Protective Signaling Systems.

MEA -  NYC Department of 

Buildings Approved.

CSFM -  California State Fire 

Marshal Approved.