Sony VPL-DX100 Benutzerhandbuch
2
VPL - DX/DW
Series
Full-featured ultraportable
Good TCO, Energy-efficient Design
and Operational Convenience
and Operational Convenience
The VPL - D Series and VPL - E Series delivers a full range of brightness options
to meet virtually any type of education or business projection environment
to meet virtually any type of education or business projection environment
• Auto Mode (Auto Brightness Adjustment Function)
The brightness of the lamp’s output is automatically
adjusted depending on the brightness of the projected
image, to avoid unnecessary power consumption. When
showing darker images that don’t require high brightness,
lamp output decreases.
adjusted depending on the brightness of the projected
image, to avoid unnecessary power consumption. When
showing darker images that don’t require high brightness,
lamp output decreases.
Lamp dimming scheme
* Lamp high mode. The values are approximate.
Lamp dimming
Input (image)
Lamp power*
100%
85%
(-15%)
30%
(-70%)
A
B
B
C
B
Slowly
Slowly
Quickly
(Restart)
In use
Not in use
In use
Automatically
Automatically
Time
5/10/15/20 min.
0 sec.
10 sec.
• Lamp Dimming Function
The VPL - D Series and VPL - E Series projectors are equipped
with a lamp dimming function. After 10 seconds of a static
signal feed, the lamp dims by approximate 15% which is
hardly noticeable.
If one of these projectors is left powered on while not in
use, after a set period of time it will automatically detect
no change of signal input and will dim the lamp to as low
as approximate 30% of original brightness to significantly
reduce energy consumption.
with a lamp dimming function. After 10 seconds of a static
signal feed, the lamp dims by approximate 15% which is
hardly noticeable.
If one of these projectors is left powered on while not in
use, after a set period of time it will automatically detect
no change of signal input and will dim the lamp to as low
as approximate 30% of original brightness to significantly
reduce energy consumption.
Lamp drive
High