TP-LINK TD-W8960N Benutzerhandbuch

28 

 

Figure 4-19 

If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps 
below to add a WAN service over a selected ATM interface: 

1.  Add a new ATM interface and select EoA option for DSL Link Type (see 

4.4.1.1  ATM 

interface

). 

2. Click 

the 

Add button on the screen Figure 4-7. Select WAN Service Interface over ATM PVC 

on the next screen (as shown Figure 4-8). 

3. Select Bridging option for the WAN service type on the screen (as shown Figure 4-9), and 

click Next button to continue. 

4.  On the screen (as shown Figure 4-13) you will see the detailed settings you’ve made. Please 

click the Apply/Save button to save these settings. 

If your ISP provides a PPPoA connection and you need to use an ATM Interface, follow the steps 
below to add a WAN service over a selected ATM interface: 

1.  Add a new ATM interface and select PPPoA option for DSL Link Type (see

  4.4.1.1  ATM 

interface

). 

2. Click 

the 

Add button on the screen Figure 4-7 and the next configuration is similar to PPPoE, 

(see section 

4.4.2.1  ATM-EoA-PPPoE

). The difference is that you don’t need to set the 

PPPoE Service Name and Bridge PPPoE Frames Between WAN and Local Ports

 

on the 

screen of Figure 4-10. 

If your ISP provides an IPoA connection and you need to use an ATM Interface, follow the steps 
below to add a WAN service over a selected ATM interface. 

1.  Add a new ATM interface and select IPoA option for DSL Link Type (see 

4.4.1.1  ATM 

interface

). 

2. Click 

the 

Add button on the screen Figure 4-7 and the next configuration is similar to IPoE 

(see section 

4.4.2.2  ATM-EoA-IPoE

). The difference is that you have to manually set the 

Static IP Address on the screen of Figure 4-15, and the Static IP Address for DNS Server on 
the screen of Figure 4-18.