TP-LINK TD-W8960N Benutzerhandbuch
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
49
Figure 4-54
4.4.11.1 DNS Server
Choose “Advanced Setup”Æ“DNS”Æ“DNS Server”, and you can see the DNS Server
Configuration screen. Deselect the checkbox before Auto DNS Server, and then you will be able
to manually configure the DNS Server Addresses as shown in Figure 4-55.
Configuration screen. Deselect the checkbox before Auto DNS Server, and then you will be able
to manually configure the DNS Server Addresses as shown in Figure 4-55.
Figure 4-55
For PPPoA, PPPoE enabled PVC(s), please select the Obtain DNS info from a WAN interface
checkbox, this Router will accept automatically the first received DNS assignment from the
selected configured WAN interface during the connection establishment.
checkbox, this Router will accept automatically the first received DNS assignment from the
selected configured WAN interface during the connection establishment.
For single PVC with IPoA, static IPoE protocol, please select the Use the following Static DNS IP
address checkbox, and enter the primary and /or optional secondary DNS server IP addresses
provided by your ISP.
address checkbox, and enter the primary and /or optional secondary DNS server IP addresses
provided by your ISP.
Click the Apply/Save button to save the new configuration.
4.4.11.2 Dynamic DNS
Choose “Advanced Setup”Æ“DNS”Æ“Dynamic DNS”, you can see the Dynamic DNS screen,
this screen allows you to configure the Dynamic DNS (shown in Figure 4-56).
this screen allows you to configure the Dynamic DNS (shown in Figure 4-56).