TP-LINK TD-W8960N Benutzerhandbuch

The Router’s LEDs are located on the front panel. 

 

Figure 1-1 

The Router’s LEDs and the QSS button are located on the front panel (View from left to right). 

Status Indication 
On 

The modem router is powered on. 

Power 

Off 

The modem router is off. Please ensure that the power adapter is 
connected correctly. 

On 

The network is available with a successful Internet connection. 

Flash 

There is data being transmitted or received via the Internet. 

Internet 

Off 

There is no successful Internet connection or the modem router is 
operating in Bridge mode. Please refer to 

Note 2 

for troubleshooting. 

On 

ADSL line is synchronized and ready to use. 

Flash 

The ADSL negotiation is in progress. 

ADSL 

Off 

ADSL synchronization fails. Please refer to 

Note 1

 for troubleshooting.

On 

Wireless is enabled but no data is being transmitted. 

Flash 

The modem router is sending or receiving data over the wireless 
network. 

WLAN 

Off 

Wireless function is disabled. 

On 

There is a device connected to this LAN port. 

Flash 

The modem router is sending or receiving data over this LAN port. 

LAN 1,2,3,4 

Off 

There is no device connected to this LAN port. 

On 

A wireless device has been successfully added to the network by QSS 
function. 

Flash 

QSS handshaking is in process and will continue for about 2 minutes. 
Please press the QSS button on other wireless devices that you want 
to add to the network while the LED is flashing. 

QSS 

Off 

The QSS function is disabled or the wireless device fails to be added 
to the network in 2 minutes after QSS function is enabled. Please refer 
to 

4.5.2.1 QSS (WPS) Setup

 for more information. 

 

 

 

4