TP-LINK TD-W8960N Benutzerhandbuch

 

Figure 4-49 

¾

  Rule Status: Select the status of the rule from the drop-down list to enable or disable the rule. 

¾

  IP Range: Enter a single IP address or a range of IP addresses. 

¾

  Port Range: Enter a single port or a range of ports. 

¾

  Protocol: Select a protocol type from the drop-down list. TCP, UDP and ALL are available 

here. 

¾

  Precedence: Select precedence form the drop-down list. There are five options: Highest, 

High, Medium, Low and Lowest. The default precedence of the rule is Medium. 

¾

  Egress Rate: Enter the min and max upload speed through the WAN port.   

¾

  Ingress Rate: Enter the min and max download speed through the WAN port.   

After completing the above configuration, click the Save/Apply button to make it take effect and 
then you will see the following list as shown in Figure 4-50. If you want to modify the rule, click the 
Edit button. If you want to delete the rule, check the Remove box first and then click the Remove 
button. 

 

Figure 4-50 

)

The precedence, max egress/ingress rate and min egress/ingress rate work on allocation of 
surplus upload/download bandwidth. For rules with different precedence, the surplus bandwidth is 
firstly allocated to the rule with the highest precedence according to its max egress/ingress rate. If 

53