TP-LINK TD-W8960N Benutzerhandbuch

Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast 
messages. The default value is 1. 

¾

  Beacon Interval: Enter a value between 20-1000 milliseconds. The Beacon Interval value 

indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router 
to synchronize the wireless network. The default value is 100. 

¾

  Transmit Power: This option will allow you to configure the wireless transmit power. High 

transmit power will extend the wireless signal range of the device and make the signal 
transmit more legible. Low transmit power with the smaller wireless signal range that will 
decrease the probability of interrupt by other Wi-Fi device. 

¾

  WMM (Wi-Fi Multimedia): This function can guarantee the packets with high-priority 

messages being transmitted preferentially. It is strongly recommended. 

Choose “Wireless”Æ”  Station Info”, you will see the screen of Wireless--Authenticated 
Stations setting shown as below. 

 

Figure 4-96 

This page shows authenticated wireless stations and their status. 

¾

  MAC: Displays the connected wireless station's MAC address. 

¾

  Associated: Displays whether the wireless station has associated with the access point. 

¾

  Authorized: Displays the information of Authentication. 

¾

  SSID: Displays the connected wireless station's SSID. 

¾

  Interface: Displays the connected wireless station's Interface mode. 

Choose “Diagnostics”, you will see the Diagnostics screen. This section describes the result of 
the test for the ENET (Ethernet) Connection, Wireless Connection and ADSL Synchronization. 
You can refer to the Help menu to get more information about the corresponding test. 

89