TP-LINK TD-W8970N Benutzerhandbuch

To configure WPA2 settings, select the WPA2 option from the drop-down list. The menu will 
change to offer the appropriate settings. The steps of these settings are similar to WPA settings. 

Figure 4-82 

¾

  WPA2 Preauthentication: Select Enable from the drop-down list, Stations will authenticate 

with the AP during the scanning process, and once association is required, the station has 
been already authenticated. 

¾

  Network Re-auth Interval: Enter a value in seconds as the frequency interval to enable 

periodic Network Re-authentication function, while leave it blank or enter “0” to disable it. 

To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The menu 
will change to offer the appropriate settings. WPA2-PSK requires a shared key and does not use a 
separate server for authentication. PSK keys can be ASCII or Hex type. 

79