TP-LINK TL-SL2210WEB/TL-SL2218WEB Benutzerhandbuch
03
Gigabit Uplink Web Smart Switch
RESET
Press this button for three seconds to reset the software setting back to factory
default setting.
default setting.
LEDs
LED
Status
Indication
Power
On
The Switch is powered on
Off
The Switch is powered off or power supply is abnormal
System
On
The Switch works properly
Off
The Switch works improperly
Link/Act
On
A valid link is established on the port
Flashing
Data is being transmitted or received. (SFP port has Link/
Act LED only and must connect to 1000Mbps device.1
Off
No device is connected to the corresponding port
100Mbps
On
The corresponding port is running at 100Mbps
Off
There is no device linked to the corresponding port or the
port is running at 10Mbps
1000Mbps
On
The corresponding port is running at 1000Mbps
Off
There is no device linked to the corresponding port or the
port is running at 100Mbps
port is running at 100Mbps
Port Feature
Model
10/100Mbps RJ45 Port 10/100/1000Mbps RJ45 Port
SFP Port
TL-SL2210WEB
8
1
1
TL-SL2218WEB
16
1
1
TL-SL2428WEB
24
2
2
TL-SL2452WEB
48
2
2
10/100Mbps RJ45 Port
Designed to connect to the device with the bandwidth of 10Mbps or 100Mbps. Each
port has a corresponding Link/Act and 100Mbps LED.
port has a corresponding Link/Act and 100Mbps LED.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with the bandwidth of 10Mbps, 100Mbps or
1000Mbps. It has a corresponding Link/Act and 1000Mbps LED.
1000Mbps. It has a corresponding Link/Act and 1000Mbps LED.
SFP Port
Designed to install SFP module. It has a corresponding Link/Act LED.
Introduction