Digi Connect WAN DC-WAN-E300-W Benutzerhandbuch

1

USB 1.1

Full-speed

Type A

N/A

1 sensor port for use with Watchport® sensors

Device Manager

Web Interface via HTTP/HTTPS, Password access control, IP service port control; CLI via serial port, Telnet, 

Python scripting; Digi SureLink™ "always-on" connection

SSL tunnels, SSHv2, FIPS 197 (IPsec, HTTPS)

UDP/TCP, DHCP, SNMPv1/v2

IPsec with IKE/ISAKMP; Multiple tunnel support; DES, 3DES and up to 256-bit AES encryption; VPN pass-through, 

GRE forwarding; Simple Certificate Enrollment Protocol (SCEP) for X.509 certificate

NAT, NAT-T (NAT traversal) VPN tunneling, Port forwarding, VPN/GRE pass-through; Access control lists (IP filtering), 

IP pass-through, Virtual Router Redundancy Protocol (VRRP) per RFC 3768

Modbus bridge enables Modbus serial to Modbus/TCP conversion; Integrated Python code allows gateway to act as Modbus client/master or Modbus 

server/slave; Functions like an Ethernet to serial bridge, but uses XBee to transport serial data; Handles unique timing issues per Modbus protocol rules; 

Uses Modbus Unit ID to look up IP or mesh MAC address.

Yes

16 MB Flash, 32 MB RAM

6-30 VDC

Idle: 1.5 W, Max: 10.4 W

4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4

Locking barrel

Compression terminal block

Available upon request

N/A

12 VDC power supply for 0º C to 40º C (32º F to 104º F) included; 

Extended temperature power supply available separately

N/A

N/A

5.25 in x 3.35 in x 1.00 in (13.33 cm x 8.50 cm x 2.54 cm) 

0.44 lb (0.20 kg)

Ethernet status, Power, Cellular link/activity, Signal strength (4 bars)

Industrial (metal)

N/A

Wall-mount bracket sold separately

DIN rail bracket included