QLogic SANbox 1400 10 Ports 2Gbps Fibre Channel Switch SB1403-10AS Merkblatt

SN0058036-00 Rev B  7/05

For a list of authorized resellers, visit www.qlogic.com/buyqlogic/home_buy.asp 

Fibre Channel Ports
• Physical & Signaling Interface Rev. 4.3 (FC-PH)
• Physical & Signaling Interface-2 (FC-PH-2)
• Physical & Signaling Interface-3 (FC-PH-3)
• Fabric Generic Requirements (FC-FG)
• Generic Services (FC-GS)
• Generic Services-2 (FC-GS-2)
• Generic Services-3 (FC-GS-3)
• Switch Fabric (FC-SW-2)
• Arbitrated Loop Rev. 4.6 (FC-AL)
• Arbitrated Loop-2 Rev. 7(FC-AL-2)
• Fibre Loop Attachment (FC-FLA)
• Tape Technical Report (FC-Tape)
• Virtual Interface Architecture Mapping (FC-VI)
• Element MIB Specification
• Fibre Alliance MIB Specification

Fibre Channel Classes of Service
• Classes 2, 3 connectionless

Modes of Operation
• Fabric
• Public Loop

Fabric Port Speed
• 2Gb/s, full-duplex, auto-negotiating for

compatibility with existing 1-Gb devices

Fabric Latency
• Less than 0.4 µs (best case, no contention)
• Cut-through routing

Fabric Point-to-Point Bandwidth
• 412 MB/s Full Duplex per port

Fabric Aggregate Bandwidth
• Single chassis: Over 40 Gb/s (full duplex)

end-to-end

• Non-blocking architecture

Maximum Frame Sizes
• 2148 bytes (2112 byte payload)

Per-port Buffering
• ASIC-embedded memory (non-shared)
• Each port has a guaranteed 16-credit zero wait 

state buffer for full performance up to10km

Ports Per Chassis
• (10) 2Gb / 1Gb ports

Multi Switch Fabrics
• Supports E-port link to another switch
• In-order delivery of frames in all multi-switch

and multi-link configurations

Fabric Port Types
• All ports can assume the following states:

- F_port: Fabric
- FL_port: Fabric loop (public loop)
- E_port: Switch-to-switch (single connection)

• Ports are auto-discovering, self-configuring

Media Type
• Hot-pluggable, industry-standard SFPs (Small Form 

Pluggable)

• Shortwave: 500 m (1,640 ft.)
• Longwave: 10 km (6.2 mi.)

Media Transmission Ranges
• Optical
- Shortwave: 500 m (1,640 ft.)
- Longwave: 10 km (6.2 mi.)

Cable Types
• 50/62.5 micron multimode fiber optic
• 9 micron single-mode fiber optic

• Compatible with FC-SW-2 compliant

switches

• Management interoperability with leading

SAN management applications

Management Processor
• 

Pentium class Processor

Management Methods
• 

Integrated with SANsurfer Express (VDS
support for leading storage providers)

• SANsurfer Switch Manager management

tools

• SNMP, Telnet, GS-3

Access Methods
• 

In-band

• 

Ethernet 10/100 BaseT with RJ45

Diagnostics
• 

Power-up self-test of all functionality except media 
modules

• 

Field-selectable full self-test including media modules 

Fabric Services
• 

Simple Name Server

• Fabric Zoning
• Registered State Change Notification

(RSCN)

• I/O StreamGuard

User Interface
• LED indicators, command-line console, and

web-based utilities

Enclosure Types and Options
• Desktop/shelf top with included rubber feet
• Optional rack mounting kit for mounting up to two   

SANbox 1400 units

Dimensions
• Width: 190.5 mm (7.5” )
• Height: 41.9 mm (1.65” ) (1U)
• Depth: 155.6 mm (6.125”)

Weight
• 0.9 kg (2 lbs)

©2004-2005 QLogic Corporation. All rights reserved.  QLogic, SANbox and SANsurfer are registered trademarks of QLogic Corporation. The QLogic logo, SANguard, SANmark, SANbox Manager,
I/O Stream Guard and Multistage are trademarks of QLogic Corporation, which may be registered in some jurisdictions. All other brands and product names are trademarks or registered trade-
marks of their respective holders. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this
brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E u r o p e   H e a d q u a r t e r s
Q L o g i c   ( U K )   LT D.
S u r r e y   Te c h n o l o g y   C e n t r e
4 0   O c c a m   R o a d       G u i l d f o r d
S u r r e y   G U 2   7 Y G       U K
+ 4 4 0 ( 0 ) 1 4 8 3   2 9 5 8 2 5

C o r p o r a t e   H e a d q u a r t e r s
Q L o g i c   C o r p o r a t i o n
2 6 6 5 0   A l i s o   V i e j o   P a r k wa y
A l i s o   V i e j o, C A   9 2 6 5 6
9 4 9 . 3 8 9 . 6 0 0 0

SANbox Express

™

SANbox 1400
Series

Harmonics
• EN 61000-3-2

Immunity
• EN 55024:1998

Marking
• FCC Part 15
• UL (USA)
• TUV (USA)
• cUL (Canada)
• cTUV (Canada)
• TUV (Europe)
• VCCI
• CE

Power Supply/Cooling
• External laptop-style power supply
• Front to back airflow with integrated

cooling fan

Operating
• Temperature: 

5 to 40 °C (41 to 104°F)

• Humidity: 

15% to 90% noncondensing

• Altitude: 

0 to +15,000 feet

• Vibration:  

IEC 68-2
5-500 Hz, random, 0.21 G rms 

• Shock: 

IEC 68-2
4 g, 11ms, 20repetitions

Non-Operating
• Temperature: 

-40°C to 70°C (-40 to 158 °F)

• Humidity: 

25% to 93% noncondensing

• Altitude: 

0 to +50,000 feet

• Vibration: 

IEC 68-2
5 to 500 Hz, random, 2.09 G rms, 

• Shock: 

IEC 68-2
30g, 292 ips, 3 repetitions, 3 axis

Operating Voltage
• 90-265 Vac, 47-63 Hz

Power Source Loading 
• 20VA

Heat Output
• 25W maximum (with full optics configuration)

Safety Standards:
• UL 60950 (USA)
• CSA 22.2 No.60950 

(Canada)

• EN60950 (EC)
• CB Scheme-IEC 60950

Emissions Standards
• FCC Part 15B Class A 

(USA)

• VCCI Class A ITE 

(Japan)

• ICES-03 Issue 3 

(Canada)

• EN55022 Level A (EC)
• CISR 22, Class A

Voltage Fluctuations
• EN 61000-3-3

SB1403-10AS

Switch unit

SB1403-10AJ

Switch unit with 10-PAK 
small form-factor pluggable 
optics (SFP)

SB1400-RACKKIT   

Optional rack mounting kit 
(

supports up to two SANbox 1400 units)

SB1400-PS   

External power supply 
replacement kit